Services & Repair

Tune and lube drivetrain, adjust brakes, minor bearing adjustment, check and torque all bolts Advise for any additional service needed

Basic Tune with additional replacement of all cables/housings up to 6 cables/housings (brake, shift, seatpost)

Same as Basic Tune with front and rear wheel true/tension and hub adjustment

Same as Pro Tune with additional replacement of all cables/housings up to 6 cables/housings (brake, shift, seatpost)

Purge old brake fluid, bleed brake with new fluid, re-install caliper and tune

Remove old brake, install new brake lever and caliper, install lines, align caliper Clean or replace rotor

Remove old rotor, install new Fix bolts and lockring

Remove old brake pads and replace with fresh ones.

Remove old wheel, tire, tube, rotor, cassette Install parts on new wheel, mount tire and inflate

Charge varies depending on the condition of the wheel

Inspect rim, spokes, and nipples, re-tension spokes, balancing radial and lateral true with even spoke tension

Remove old tube, install new tube. Mount and seat tire, inflate.

Remove old tire, install new tire. Mount and seat tire, inflate.

Prepare rim surface, install rim tape and valve. Charge can vary based on condition.

Refresh sealant

Standard boxed bike; incldues derailleur hanger align/drivetrain tuning, dropper post install

For bikes like Santa Cruz, which are more involved to build Same as standard plus brake line cutting/bleeding

Pack bike for standard shipping, includes all packing materials

Cut bars to specified length, finish cut ends

Install seatpost in frame, route and fix line, install remove lever in handlebar, cut line, bleed, adjust as necessary. Install seatpost in frame, route and fix line, install remove lever in handlebar, cut line, bleed, adjust as necessary.

Cut fork steerer tube to appropriate length.

Set high and low limits, adjust cable tension, align derailleur hanger

Set high and low limits, adjust cage position and cable tension as needed

Remove and replace cassette, chain, chainring(s), rear derailleur and shifter Align derailleur hanger

Remove and replace chainring; includes crankset replacement labor

Remove old cassette, install new Torque lockring

Remove old chain/cut new chain to length, install

Remove and replace crankset, adjust preload, replace pedals *Does not include bottom bracket or chainring replace labor*

Mount derailleur to frame, route and fix cable, and tune Align derailleur hanger. Includes replacing cable

Install shifter on handlebar, route cable through shifter mechanism Includes a derailleur tune

Remove old shifter, install new *Does not include derailleur tune; shifter install is 50% off with derailleur tune*

Strip, clean and lube chain, chainrings, cassette and pulleys

Depressurize and remove air sleeve, dissemble damper, inspect shock internals, install new seals and lubricate. Does not include cost of seals

Depressurize and remove air sleeve, dissemble damper, inspect shock internals, install new seals and lubricate. Does not include cost of seals

Inspect chassis and adjuster function, disassemble fork, inspect all dampers, bushings, and spring assemblies, flush and replace oil, clean, lube, and reassemble (cost of seal kit is an additional charge)

Air sleeve rebuild (cost of seat kit is an additional charge)

Press headset cups into frame

Face head tube on frame (does not include headset removal/install)

Chase threads into frame (does not include bottom bracket install/removal)

Face bottom bracket shell and chase threads

Face bottom bracket shell (does not include bottom bracket removal/install)

Face IS or post mounts on frame or fork (does not include brake install/adjustment)