Wolf Tooth Elliptical Direct Mount Chainring - 30t, SRAM Direct Mount, Drop-Stop, For SRAM BB30 Short Spindle Cranksets, 0mm Offset, Black, Full View
Wolf Tooth Elliptical Direct Mount Chainring - 30t, SRAM Direct Mount, Drop-Stop, For SRAM BB30 Short Spindle Cranksets, 0mm Offset, Black, Full View
Wolf Tooth Elliptical Direct Mount Chainring - 30t, SRAM Direct Mount, Drop-Stop, For SRAM BB30 Short Spindle Cranksets, 0mm Offset, Black, Full view of chain/chainring type compatibility chart
Wolf Tooth Elliptical Direct Mount Chainring - 30t, SRAM Direct Mount, Drop-Stop, For SRAM BB30 Short Spindle Cranksets, 0mm Offset, Black, Full View
Wolf Tooth Elliptical Direct Mount Chainring - 30t, SRAM Direct Mount, Drop-Stop, For SRAM BB30 Short Spindle Cranksets, 0mm Offset, Black, Full View
Wolf Tooth Elliptical Direct Mount Chainring - 30t, SRAM Direct Mount, Drop-Stop, For SRAM BB30 Short Spindle Cranksets, 0mm Offset, Black, Full view of chain/chainring type compatibility chart


Wolf Tooth Components

Wolf Tooth Elliptical Direct Mount Chainring - 30t, Oval, SRAM Direct Mount

81751

$69.95 Save $0.00
/

Shipping calculated at checkout.

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10-percent and a timing of 112-degrees after the top dead center which provides the benefit of an oval ring such as greater rear-wheel traction without the traditional downsides of oval rings.

FEATURES:

  • Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11, and 1x12 drivetrains
  • Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
  • Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
  • If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
  • Not compatible with the SRAM RED and Force AXS 8-bolt interface
  • Made from 7075-T6 aluminum for long life
  • Use of a clutch-style rear derailleur is recommended
  • 0mm offset is designed for BB30 short spindle cranks (49mm chainline)

SPECS:

  • Material: Aluminum
  • Shape: Oval
  • Chainline/Hub Compatibility: 135/142 MTB Hubs
  • Direct Mount Type: Direct Mount SRAM
  • Tooth Count: 30t
  • Ring Position/Type: Chain retaining single ring
  • Drivetrain Speeds: 9-12
  • Chainring BCD: Sram Direct Mount
  • Offset: 0mm