The Syncros Trail Fender is made from a high quality Impact PP that balances stifness and durability. Designed to work specifically with Fox® 34 & 36 Boost forks, the Trail Fender features a 2-bolt direct mount. This means a clean and reliable mount that is easily removable.
We teamed up with Dakine to create these Path Bike Shop Hot Laps Grippers!
Minimally designed to stow away easily almost anywhere on your bike frame, the Gripper is perfect for holding just the essentials for a quick ride, and works in tandem with any of our larger packs to move a little weight off your back and onto your bike frame, freeing up valuable space for water and food on longer rides.
These model-specific MTB short fenders keep you dry and clean when the weather turns messy. They can be easily installed at two points to look as if the fork and fender are one, that means no zip ties!
TheTIMBER Bolt-Onis identical to the original Timber model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8 mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2 mm shim, for mounting your bell securely near your grips, closer to your hands. (For oversize and DH bars, you will want to use the shim and mount near the grips.)
Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar.
Do you run a waist pack or backpack? Mount the Strap On to your shoulder strap or waist strap to securely carry a tool on the go. A patented spring mechanism prevents the tool from ejecting by accident. Keep it within arms reach and you’ll never need to open your pack to grab your tool again. Available in 2 sizes – wide or narrow – to fit different pack constructions. * tool sold separately
Customize your trail and enduro machines with the vibrant hues and stand-out appeal of the Santa Cruz Custom Downtube Decal. This custom decal sticks onto your bike's downtube, popping brilliantly from matte carbon frames and shiny paint schemes alike. It's compatible with 2017 Santa Cruz models except the V10 and 2016 Santa Cruz models except the V10, Tallboy, Stigmata, Highball, Heckler, and Chameleon.
This fender was first launched as the 'Bender Fender' back in 2009, ultimately leading to the creation of Mucky Nutz as a brand.
Truly the first of its kind, the Bender Fender took the mountain bike community by storm with its simplicity and effectiveness.
Now having evolved with subtle improvements and refinements made over the last decade, the Face Fender is more popular than ever. Available in a variety of colourways, widely used and endorsed by Weekend Warriors, Pro Downhill and Enduro riders around the world.
The original, proven design - manufactured right here in the UK to our premium standards to compliment your ride and stand years of abuse on the trails.
Stops muck, gravel, pine needles and animal s*** being flung into your face.
Can be used on 26", 27.5" and 29" wheel sizes, and compatible with boost forks.
Protects your fork stanchions, seals and bridge from getting caked, reducing the need for cleaning and servicing.
Lightweight, Discreet and effective - it weighs just25 grams!
When fitted correctly there is no movement or rattling. You won't even know it's there.
Compatible with forward and double bridge fork designs.
Can be used as a rear shock guard on some full-sus bikes.
Easy to clean as it's flexible and opens flat. Simply wipe it and you're done!
Comes with genuine, high quality Velcro straps to attach to the fork - Velcro is soft on the paintwork, and makes fitting and removal a breeze. You can choose zip-ties if you prefer.
If you're the type who considers time in the saddle part of the daily routine, you know you don't always need a full pack to get in a few miles on the trail. That's where the Hot Laps Gripper Bag comes in. Minimally designed to stow away easily almost anywhere on your bike frame, the Gripper is perfect for holding just the essentials for a quick ride, and works in tandem with any of our larger packs to move a little weight off your back and onto your bike frame, freeing up valuable space for water and food on longer rides.
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
*EDC Tool sold separately*
A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market.
Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.
EDC PUMP SPEC
High Volume 70cc and 100cc
1-1/4" dia x 7" for 70cc (32mm dia x 178mm)
1-1/4" dia x 10" for 100cc (32mm dia x 254mm)
100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule
70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2
Fast-On Head (Presta Only) - No threads or locking levers
Integrated CO2 Inflator
Fully Sealed, Weatherproofed Internals
Includes Bottle Cage Mount
135g - 70cc, 160g - 100cc (without EDC tool system)
The simple roll-up design carries essential ride necessities and securely straps to seat rails. Unfolds to 270 x 260 mm to organize and accommodate large cycling accessories. Internal zippered pocket secures small valuables. Durable nylon construction.
Perfect both on the shop workbench and your traveling toolbox, the Torque Drive from Lezyne is a handsome torque wrench that ensures the proper tightening force of all of your bike's fasteners. Machined and anodized, the handle is removable for easy storage and travel and the bits are magnetic, keeping them in place.
The Torque Drive has a capacity between 2 and 10Nm and includes a soft shell carrying case with storage cutouts. It includes Allen hexes in 2, 2.5, 3, 4, 5, and 6mm, Torx bits in T10, T25, and T30, and flat and Phillips head screwdrivers.
Adjustable Torque Driver for tightening bolts to recommended spec
Torque capacity is between 2 and 10Nm
Machined aluminum construction with removable handle